GeneAll®
Axygen®
BIOplastics
Bioshop®
Biological Industries
CORNING
DLAB
GENESTATM
GentexTM
Labnet
Major Science
Sigma-Proligo
Torrey Pines Scientific
Instruments > Fermentation

제품명 Fermentation- Air Lifter Vessel
브랜드 Major Science
보관 상온
Cat.No.   Product Description Size 장바구니/견적요청/기타문의
FS-01-C051P-110/220V Complete Thermostat Fermentation System for 5L Single Wall Air Lifter Vessel, 110V 220V      
FS-01-C052P-110/220V Complete Thermostat Fermentation System for 5L Double Jacketed Air Lifter Vessel, 110V 220V      

 

Features

  • Micro-sparger and adjustable draft tube to facilitate water circulation and achieve high aeration efficiencies

  • Single wall or double jacketed vessels available

  • Color touch screen and graphical user interface for easy operation

  • Real-time trend data recording ensures best fermentation performance

  • 2-stage DO cascade for precise DO (dissolved oxygen) level control

  • Ethernet remote control ability allows you to navigate and operate your fermentation process from your desktop

  • No additional software required

  • Quick connectors for easy operation

  • 4 built-in assignable and programmable peristaltic pumps for automatic pH, antifoam and feeding control

  • Automatic process allows you to set up your 15 steps programmable control

  • Manual process allows you to run individual parameters independently

  • Photobioreactor lighting module (optional) for your photosynthesis reaction

  • Full accessories are offered as a standard package

Specification

Vessel Type Double Jacketed Single Wall
(without temperature control)
 Working volume (Liter) 5.0 Liter
Total volume (Liter) 6.9 Liter
Material Borosilicate glass / 316L stainless steel for headplate and all fittings
Control Unit Control panel 10.4" Color touch-screen interface
Communication port Remote control through Ethernet
Data export through USB port
RS-485 port for system extension
Program storage Up to 59,994 process programs
Log data storage Up to 100 process monitoring data files
Cabinet material ABS front panel and painted iron housing
Dimension Footprint: W x D = 400 x 500 mm 
(15.75" x 19.69")
Height = 740 mm (29.13")
Rated voltage 110V~/ 220V~ ; 50-60 Hz
Aeration Inlet gas flow-meter 0, 1-10 LPM
Tube Adjustable draft tube
Sparger Micro-sparger
Temperature
(Double jacketed vessel only)
Control system Thermostat system;
Built-in heat exchanger (400W heater / water circulation pump);
Automatic cooling water valve
Range 5°C (41°F) above coolant up to 60°C (140°F)
Resolution 0.1°C
Probe Platinum RTD probe (Pt 100)
Control mode Manual or Programmable 15 steps PID control
pH Range 2 -14 pH
Resolution 0.01 pH
Probe Gel-filled electrode: Autoclavable
Control mode Manual/ Acid Start/ Programmable 15 steps PID control with adjustable deadband
DO Range 0 - 200%
Resolution 0.1%
Probe Polarographic DO sensor; Autoclavable
Control mode 2-stage DO cascade response: (operate under manual or process mode)
a. Increase or decrease agitation speed
b. Oxygen enrichment module (optional device required)
c. Gas Mixing Station module (optional device required)
Substrate feeding strategy
ORP
(optional)
Measurement range -/+ 2000mV
Resolution 1 mV
Probe Gel-filled electrode: Autoclavable
Foam Probe 316L stainless steel with insulated teflon tube;
On/Off control
Peristaltic pump Pump number 4 Built-in pumps; fifth external pump (optional device required)
Motor type Precise stepping motor; minimum speed is 1 rpm
Speed range 0 - 65 rpm
Resolution 1 rpm
Control mode Manual or Programmable 15 steps feeding control;
Pump can be assigned for Acid, Base, Antifoam and Substrate
Exhaust Device type 316L stainless steel condenser
Utility requirement Power source 100-120V~50-60Hz or 210-230V~50-60Hz with electrical safety cutoff switch
Water source 2 Bar maximum (29 psi);water supplied to fermenter must be at least 15°C below set point operatin temperature
Air source 1 Bar maximum, must be dry, oil-free and filtered
Minimum pressure 0.1499 kg/cm2 and air flow rate 60L/min
Sterilization Autoclave; size of autoclave inner chamber must be able to accomdate vessel with attached condenser

Thermostat System with Air Lifter Vessel includes:
 Controller  Thermostat System Controller
 Built-in rotameter
 4 x built-in pump head
 Vessel  Air lifter vessel (includes glass body, head plate, draft tube, T handing bar, 2 probe adaptors)
 Condenser assembly
 Micro sparger assembly
 Probes  1 x pH probe and 1 x pH cable
 1 x DO probe and 1 x DO cable
 1 x Temperature probe and 1 x Temperature cable (Double jacketed vessel only)
 1 x Foam/Level Sensor and 1 x Foam/Level Sensor cable
 Start-up Kit Includes 4 x 250 ml Glass Feeding Bottles, 1 x 500ml Glass Feeding Bottle, 10 x 45 mm 0.2 µm
Autoclavable Disc Type Filters, 15 x Connecting Tubes, 12 x Silicon Tubing Clamps, 25 ft of 1/8 inch (3.2 mm) Silicon tube, 1 x Handy Burner, 1 x 2 mm Hex Wrench, and 1 x 12 mm & 14 mm Double Open-end Wrench

Accessories

Cat. No  Description
 Controller (includes Thermostat System Controller, Built-in rotameter and 4 x built-in pump head)
 FS-01-110/220V  Winpact Thermostat System Controller, 110V/220V
 Vessels (includes Air lifter vessel, Condenser assembly and Micro sparger assembly)
 FS-V-C051  5L Single Wall Air Lifter Vessel
 FS-V-C052  5L Double Jacketed Air Lifter Vessel